Snuza Hero

Hero has an additional vibration feature which causes the unit to vibrate gently after 15 seconds where no abdominal movement has been detected. This often serves to reassert the baby's movement, but if no further movement is detected, Hero emits an alarm. Snuza Go! will go directly to alarm mode after 15 seconds of no movement.
Although 'under the mattress' monitors also monitor movement in a similar manner to Snuza Hero, these monitors are generally not mobile. Hero can be left attached to the baby for constant monitoring or kept in the carrying case, attached and activated whenever required, no matter where the baby is.
Snuza Hero monitors the tummy area which is where most of the movement occurs, so it's much better at picking up these movements than under-mattress monitors. This means that false alarms are drastically reduced. In addition, with under-mattress monitors, if the baby moves off the sensor pad during the night, it will false alarm. This won't happen with Hero since it is attached to the diaper.
This is a proactive stimulator which attempts to rouse your baby after 15 seconds of no movement. Very often, if a baby is still for this long, a little tactile stimulation gets the movement going again. And of course, if it fails to rouse the baby, the alarm will sound after a total of 20 seconds of no movement.
No, strictly speaking by definition of MDD 93/42/EEC and 2007/47/EEC, Hero is not a medical device. It falls into a similar class of device as exercise heart-rate monitors (the kind that has a strap around your chest and transmits your heart rate to a watch) all this device is used for is to monitor movement. It should not be used to diagnose, monitor, treat or alleviate a disease, injury or handicap. Nor should it be used to investigate (i.e. find the cause of) a physiological process (i.e. breathing).
Snuza Movement Monitors don't transmit sound. In fact, they don't transmit any radio frequency at all (and hence there's no danger of radio-frequency radiation). The only thing that emanates from Hero is sound (from the alarm) and light (from the indicator LEDs), making it ultra-safe for use on babies. If you would like to transmit sound to another room in the house, we recommend that you use Hero in conjunction with an Audio or Audio/Video monitor, such as Snuza Video. This way, if Hero alarms, you will be sure to hear it over the Audio/Video monitor. Our unique Snuza Trio 3-in-1 combination is the perfect solution, providing Audio, Video and Movement monitoring in one package.
Although there are already baby movement monitors on the market which alert parents or caregivers to any cessation in movement they do not offer mobility as they rely either on the availability of electricity, or on the baby being at home in its cot where the under-mattress monitors need to be placed. Snuza Hero monitors are fully mobile and can be used wherever baby is, eg in a carseat, stroller, pram, carrycot, etc.
Once Hero is clipped onto the diaper and activated, it will immediately start monitoring movement. If your baby were to stop all movement for 15 seconds, Hero will emit a safe, vibrating stimulus to gently rouse the baby. If after 5 more seconds, movement has not resumed, Hero will sound an alarm to alert you to act.
Very easy. Just clip it onto your baby's diaper and turn it on. This shouldn't take more than a few seconds.
Yes. If the fabric nappies are too thick for attachment, Hero should be securely attached to the nappy cover or waterproof pants - ensure a snug fit so that Hero maintains body contact. You may need to position Hero slightly to the side to ensure maximum contact.
Hero relies on movement in the area where the sensor is located. Usually, when sleeping on its back (as recommended by the World Health Organisation to reduce the risk of SIDS) the sensor contained in the blue tip of Hero will be located as close to the tummy as possible where the most movement of a baby occurs. If baby sleeps on its tummy, then the tummy movement is reduced, simply because of the restriction of the mattress. More movement occurs at the sides than when sleeping on the back. By trial you will need to position Hero away from the tummy, because that will cause discomfort, towards the side where you can visibly see movement. There is a greater possibility of false alarms occurring in this case, but after a few trials you will find a position to attach Hero that will provide successful monitoring of movement. Please also be aware that if your baby sleeps on his tummy then any alarm sound may be muffled, and the use of a sound monitor may be required.
Absolutely! Baby's safety is paramount. Hero utilises an ultra-low voltage (3.6V) battery, emits no radiation and has no side effects.
Hero clips onto the diaper and the sensor located at the tip of Hero needs to be in contact with the baby in the area of the navel. There may be a thin layer of clothing (eg. a vest) between the sensor and the skin.
Yes, this is what separates it from other monitors. As Hero requires no mains power, wires or cords (it is battery operated) it can go anywhere and everywhere you and your baby go. Please note:- Hero monitors detect all movement, including those from external sources such as a moving vehicle, pram, etc. Hero should only be relied upon when there is NO external movement present, ie when the vehicle, pram, carrycot, etc is stationery.
Biosentronics recommends that Hero be used until the age of 1 year.
Yes, absolutely. If the battery fails or the power is depleted, it can easily be replaced by purchasing a battery from your national Snuza Distributor (see details on the Contact Us page of this website). This will then enable you to use Hero for subsequent babies.
Please see Replacing the Battery on the Hero Support page on this website.
The battery is non-rechargeable but can be replaced (see Replacing the Battery on the Hero Support page on this website ).
There is a feature that is designed to detect when there are very small movements, or small relative movements. This may be used to check if Hero is properly attached to the diaper (and only tiny movements are being detected). It's actually an orange flash, but it looks red because it flashes so fast and the eye sees red as the dominant colour. You should not be concerned at all if it occasionally flashes orange (even if it looks red) - the unit is still functioning perfectly normally and monitoring every movement. Of course, if it flashes red on each movement, it indicates that there has been a vibration, and movement resumed.
The Snuza Hero will pick up any external movement. The Snuza Hero is not suitable for co-sleeping or bedsharing.
Please ask the Snuza Distributor in your territory (see our Contact Us page on this website) or contact us directly.